Merge commit 'c039c332f23e794deb6d6f37b9f07ff3b27fb2cf' into md

Pull in pre-requisites for adding raid10 support to dm-raid.

Merge with upstream to accommodate with thermal changes

This merge is performed to take commit c56f5c0342dfee11a1 ("Thermal: Make
Thermal trip points writeable") out of Linus' tree and then fixup po

Merge with upstream to accommodate with thermal changes

This merge is performed to take commit c56f5c0342dfee11a1 ("Thermal: Make
Thermal trip points writeable") out of Linus' tree and then fixup power
supply class. This is needed since thermal stuff added a new argument:

CC drivers/power/power_supply_core.o
drivers/power/power_supply_core.c: In function ‘psy_register_thermal’:
drivers/power/power_supply_core.c:204:6: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default]
include/linux/thermal.h:154:29: note: expected ‘int’ but argument is of type ‘struct power_supply *’
drivers/power/power_supply_core.c:204:6: error: too few arguments to function ‘thermal_zone_device_register’
include/linux/thermal.h:154:29: note: declared here
make[1]: *** [drivers/power/power_supply_core.o] Error 1
make: *** [drivers/power/] Error 2

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

show more ...

Merge branch 'for-jens' of git://git.drbd.org/linux-drbd into for-3.6/drivers

Merge tag 'v3.5'

Linux 3.5

* tag 'v3.5': (1242 commits)
Linux 3.5
Remove SYSTEM_SUSPEND_DISK system state
kdb: Switch to nolock variants of kmsg_dump functions
printk: Implement some unlock

Merge tag 'v3.5'

Linux 3.5

* tag 'v3.5': (1242 commits)
Linux 3.5
Remove SYSTEM_SUSPEND_DISK system state
kdb: Switch to nolock variants of kmsg_dump functions
printk: Implement some unlocked kmsg_dump functions
printk: Remove kdb_syslog_data
kdb: Revive dmesg command
dm raid1: set discard_zeroes_data_unsupported
dm thin: do not send discards to shared blocks
dm raid1: fix crash with mirror recovery and discard
pnfs-obj: Fix __r4w_get_page when offset is beyond i_size
pnfs-obj: don't leak objio_state if ore_write/read fails
ore: Unlock r4w pages in exact reverse order of locking
ore: Remove support of partial IO request (NFS crash)
ore: Fix NFS crash by supporting any unaligned RAID IO
UBIFS: fix a bug in empty space fix-up
cx25821: Remove bad strcpy to read-only char*
HID: hid-multitouch: add support for Zytronic panels
MIPS: PCI: Move fixups from __init to __devinit.
MIPS: Fix bug.h MIPS build regression
MIPS: sync-r4k: remove redundant irq operation
...

show more ...

Merge branch 'drm-next' of ../main_line/linux-drm into dave-drm-next

Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery', 'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2'

Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery', 'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2' into release

show more ...

Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstream

Two bits were appended to the end of the bitfield
list in struct scsi_device. Resolve that conflict
by including both bits.

Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstream

Two bits were appended to the end of the bitfield
list in struct scsi_device. Resolve that conflict
by including both bits.

Conflicts:
include/scsi/scsi_device.h

show more ...

Merge branch 'board-specific' of git://github.com/hzhuang1/linux into late/board

From Haojian Zhuang <haojian.zhuang@gmail.com>:

* 'board-specific' of git://github.com/hzhuang1/linux:
ARM: pxa: h

Merge branch 'board-specific' of git://github.com/hzhuang1/linux into late/board

From Haojian Zhuang <haojian.zhuang@gmail.com>:

* 'board-specific' of git://github.com/hzhuang1/linux:
ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently
ARM: pxa: remove eseries.h

It seems I missed this in the original pull requests for v3.6, adding
it now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fixes

The merge of the 'clk-for-linus' branch caused an automated
merge failure. Pull that in here so we ca

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fixes

The merge of the 'clk-for-linus' branch caused an automated
merge failure. Pull that in here so we can fix the problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch 'next' into for-linus

Merge remote-tracking branch 'origin' into irqdomain/next

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

1) Remove the ipv4 routing cache. Now lookups go directly into the FIB
trie and

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

1) Remove the ipv4 routing cache. Now lookups go directly into the FIB
trie and use prebuilt routes cached there.

No more garbage collection, no more rDOS attacks on the routing
cache. Instead we now get predictable and consistent performance,
no matter what the pattern of traffic we service.

This has been almost 2 years in the making. Special thanks to
Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
have helped along the way.

I'm sure that with a change of this magnitude there will be some
kind of fallout, but such things ought the be simple to fix at this
point. Luckily I'm not European so I'll be around all of August to
fix things :-)

The major stages of this work here are each fronted by a forced
merge commit whose commit message contains a top-level description
of the motivations and implementation issues.

2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
input.

3) TCP SYN/ACK performance tweaks from Eric Dumazet.

4) Add namespace support for netfilter L4 conntrack helpers, from Gao
Feng.

5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
Yuval Mintz.

6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

7) Support for connection tracker helpers in userspace, from Pablo
Neira Ayuso.

8) Allow userspace driven TX load balancing functions in TEAM driver,
from Jiri Pirko.

9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
up in the packet scheduler layer. Whereas the existing BQL (Byte
Queue Limits) limits the pkt_sched --> netdevice queuing levels,
this controls the TCP --> pkt_sched queueing levels.

From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
send data in the SYN exchange, from Yuchung Cheng.

Basically, the sender queues up data with a sendmsg() call using
MSG_FASTOPEN, then they do the connect() which emits the queued up
fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
hit a locked socket. The TCP Small Queues changes added a
tcp_release_cb() that allows us to queue work up to the
release_sock() caller, and that's what we use here too. From Eric
Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
r8169: revert "add byte queue limit support".
ipv4: Change rt->rt_iif encoding.
net: Make skb->skb_iif always track skb->dev
ipv4: Prepare for change of rt->rt_iif encoding.
ipv4: Remove all RTCF_DIRECTSRC handliing.
ipv4: Really ignore ICMP address requests/replies.
decnet: Don't set RTCF_DIRECTSRC.
net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
ipv4: Remove redundant assignment
rds: set correct msg_namelen
openvswitch: potential NULL deref in sample()
tcp: dont drop MTU reduction indications
bnx2x: Add new 57840 device IDs
tcp: avoid oops in tcp_metrics and reset tcpm_stamp
niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
niu: Fix to check for dma mapping errors.
net: Fix references to out-of-scope variables in put_cmsg_compat()
net: ethernet: davinci_emac: add pm_runtime support
net: ethernet: davinci_emac: Remove unnecessary #include
...

show more ...

Merge branches 'regulator-core', 'regulator-dt' and 'regulator-dummy' into regulator-next

Merge tag 'v3.5-rc7' into late/soc

Linux 3.5-rc7

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Merge branch 'common/pinctrl' into sh-latest

Merge tag 'v3.5-rc7' into drm-next

Merge Linus tree into drm to fixup conflicts in radeon code for further
testing before upstream merge.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Conflicts:

Merge tag 'v3.5-rc7' into drm-next

Merge Linus tree into drm to fixup conflicts in radeon code for further
testing before upstream merge.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/radeon/radeon_gart.c

show more ...

Merge 3.5-rc7 into char-misc-next.

This lets us pick up the mei driver changes that we need in order to
handle future merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'topic/hda' into for-next

This is a large chunk merge for 3.6 HD-audio things

ath9k: Fix race in reset-work usage

Using work_pending() to defer certain operations when
a HW-reset work has been queued is racy since the check
would return false when the work item is actually in

ath9k: Fix race in reset-work usage

Using work_pending() to defer certain operations when
a HW-reset work has been queued is racy since the check
would return false when the work item is actually in
execution. Use SC_OP_HW_RESET instead to fix this race.
Also, unify the reset debug statistics maintenance.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: Reconfigure VIF state properly

When an interface in AP or P2P-GO mode is removed,
check whether a station interface is already present and
reconfigure the beacon timers etc. properly if it's

ath9k: Reconfigure VIF state properly

When an interface in AP or P2P-GO mode is removed,
check whether a station interface is already present and
reconfigure the beacon timers etc. properly if it's
associated.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: Fix ANI management

Currently, there are problems with how ANI is handled in
multi-VIF scenarios. This patch addresses them by unifying
the start/stop logic.

Signed-off-by: Sujith Manoharan <

ath9k: Fix ANI management

Currently, there are problems with how ANI is handled in
multi-VIF scenarios. This patch addresses them by unifying
the start/stop logic.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: Set the TSF adjust value properly

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Cleanup beacon queue configuration

Setup the beacon queue parameters after disabling
interrupts. Also, remove the redundant call in conf_tx()
for IBSS mode since the queue would be configured

ath9k: Cleanup beacon queue configuration

Setup the beacon queue parameters after disabling
interrupts. Also, remove the redundant call in conf_tx()
for IBSS mode since the queue would be configured
with the appropriate cwmin/cwmax values when beaconing
is enabled.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: Remove is_bslot_active

In the tx_last_beacon() callback, mac80211's beaconing
status can be used instead. The beacon tasklet doesn't require
it because it is disabled when removing a slot.

S

ath9k: Remove is_bslot_active

In the tx_last_beacon() callback, mac80211's beaconing
status can be used instead. The beacon tasklet doesn't require
it because it is disabled when removing a slot.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...